The all-new FMS FCX18 Series - Toyota Land Cruiser 80 RTR

Authorized by Toyota Motor Corporation, FMS has replicated the highly acclaimed classic off-road vehicle, the Land Cruiser 80, with the product standard of "perfect appearance, excellent performance." From the straight body lines, roof luggage rack, snoykel, front and rear bumpers, usable spare tire, to steering-linked turn signal assembly, simulated bevel gear driving axles, ball bearings full set (24pcs), FMS focuses on every detail.

The FCX18 is equipped with a straight axle by default, but the planetary gear differential can also be replaced with high-viscosity silicone oil to simulate the driving effect of an LSD limited-slip differential. After installing the differential, the ultimate climbing ability will be reduced, but a smaller turning radius and a more stable high-speed driving quality can be obtained.

The two-speed gearbox uses CH3 of the remote control and is operated by a 9G steering gear. The low gear reduction ratio is 99, which is larger than that of similar products currently on the market. The torque output is strong and easy for extreme climbing. The high gear reduction ratio is 24.75, and the speed is higher than that of all similar products currently on the market. You can experience the fun of high-speed, small jumps, and even wheelies.

The water-resistant electronics system consists of two independent servos, a 3-in-1 receiver/ESC/light control, a 180 brushed motor and a 7.4V 900mAh battery, allowing for a high power-to-weight ratio and all-weather operations.

A variety of upgraded and modified parts such as metal differential, metal universal joint drive shaft, metal gears, brass wheel counterweights and trailers (three styles) etc. will be launched to match the FCX18 chassis for further improving the performance of the vehicle.

The LC80 series models, known for their excellent off-road performance, reliability, durability, and comfort, are among the top choices for adventurers, off-road enthusiasts, and many specialized departments around the world. They are also one of the most popular off-road vehicles worldwide. The FMS 1/18 LC80 pays tribute to this faithful and reliable old companion.

Are you looking for a mini scaler that's dependable, detailed and confident on any terrain? Look no further than the Land Cruiser LC80 from FMS!

Features :

• Ready to run model
• Power configuration includes 3-in-1 receiver/esc/light control, 180 brushed motor and 7.4V 900mAh battery
• Non-load-bearing climbing vehicle chassis
• Metal low bars (4pcs) and steering links (2pcs)
• Usable spare tire-not pure decoration
• Headlights, taillights, and roof lights, with 12 lamp beads, 4 lighting effects, and 5 remote control modes
• Two-speed transmission
• Portal axles (metal gear)
• Ball bearings full set (24pcs)
• Metal-gear steering servo
• Four-link suspension
• Coil springs + oil damper
• 4WD
• Rigid metal girder
• Front & rear bumper kit & roof rack
• Openable hood
• Painted body
• Three color options
• Optional modification parts, like metal differential, metal universal joint drive shaft, metal gears, brass wheel counterweights and trailers (three styles)

What's in the box :

• 1 x FCX18 LC80 RTR
• 1 x Transmitter
• 1 x Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 7.4V 900mAh Battery
• 1 x USB Battery Charger
• 1 x Product Manual

Need To Complete :

4 x AAA Batteries for Transmitter

Specification :

• Length: 282mm
• Width: 126mm
• Height: 136mm
• Wheelbase: 160mm
• Tire F/R: Φ 56*19.2mm
• Minimum Ground Clearance: 35mm
• Approach Angle: 61°
• Departure Angle: 35°
• Motor: 180 Brushed motor
• Battery: 2S Lipo 7.4V 900mAh x1
• Remote control distance: 30m
• Approx. operating duration time: 45mins
• Remote control: MG41-BS transmitter, R4A1 receiver with ESC group control board