Orders over $99 qualify for free shipping. Delivery availability and timing may vary by destination.
Eligible products can be returned within 30 days when they meet the return requirements.
Coverage is available for qualifying product defects during the first 90 days after purchase.
Simple is beautiful. Without any landing gear to deal with, the Arrows 50mm BAE Hawk is lightweight and streamlined- perfect for those with a tight flying field or budget!
To minimize drag, increase flight time and guarantee the precision flight characteristics of the BAE Hawk, Arrows designed a rigid single-piece wing structure and horizontal stabilizer. The lightweight airframe and exceptional aerodynamics give the 50mm jet excellent low speed handling and flight time – uncharacteristic for small EDF jets of its size.
Power comes courtesy of a 50mm 11-blade fan unit, 2627- 500KV brushless motor and a high performance 30A ESC (with 3A BEC) giving unparalleled speed and sound.
In addition, Arrows takes the details a step further, with a friction-resistant tail fin on the belly of the BAE Hawk and a servo protector on the bottom of the wings to facilitate belly landings.
How do you get pinnacle performance on a small budget? Let Arrows work its magic with the 50mm BAE Hawk!
Wing Area: 8.6d㎡ Wing Loading: 55.2g/d㎡ Approximate Flying Duration: 4 minutes Wingspan: 661.5mm (26.04in) Length: 725mm (28.5in) CG (Center of Gravity): 60-70mm from the leading edge Power System: Brushless 2627-KV4500 Electronic Speed Control: 30A (XT60 male connector) Propeller / EDF: 50mm 11-blade Servos: 9g plastic servo x 3pcs Landing Gear: None Required Battery: 11.1V 1300MAH 30C Required Radio: 6 Channel transmitter and receiver required to get default switch selection for Vector. Will fly on 4 channel but you will have to program the Vector to a switch. Ailerons: Yes Elevator: Yes Rudder: No Flaps: No Skill Level: Intermediate Build Time: 15 minutes Gyro: Vector
Assigning a 3-Position Transmitter Switch for the Vector Module
| Wing Area | 8.6d㎡ |
|---|---|
| Wing Loading | 55.2g/d㎡ |
| Approximate Flying Duration | 4 minutes |
| Wingspan | 661.5mm (26.04in) |
| Length | 725mm (28.5in) |
| CG (Center of Gravity) | 60-70mm from the leading edge |
| Power System | Brushless 2627-KV4500 |
| Electronic Speed Control | 30A (XT60 male connector) |
| Propeller / EDF | 50mm 11-blade |
| Servos | 9g plastic servo x 3pcs |
| Landing Gear | None |
| Required Battery | 11.1V 1300MAH 30C |
| Required Radio | 6 Channel transmitter and receiver required to get default switch selection for Vector. Will fly on 4 channel but you will have to program the Vector to a switch. |
| Ailerons | Yes |
| Elevator | Yes |
| Rudder | No |
| Flaps | No |
| Skill Level | Intermediate |
| Build Time | 15 minutes |
| Gyro | Vector |
Completion level: PNP.
loading
