Orders over $99 qualify for free shipping. Delivery availability and timing may vary by destination.
Eligible products can be returned within 30 days when they meet the return requirements.
Coverage is available for qualifying product defects during the first 90 days after purchase.
The Arrows Husky 1800mm Ultimate is a PNP bush plane inspired by the PA-18 utility-aircraft layout. It combines a high wing, functional flaps, oversized tires, CNC landing gear and scale lighting for STOL-oriented flying from conventional or rougher fields.
This Ultimate version uses upgraded electronics for 6S power: a 3948-550kV motor, 50A ESC and six 23g metal-gear servos. Fiber-reinforced control surfaces support precise control, while the installed Vector module adds selectable flight stabilization.
The clean side view shows the red-and-black Ultimate trim, high wing, struts and oversized wheels.
The low front-quarter view presents the balloon tires, landing-gear geometry, nose and cabin together.
The outdoor profile shows the Husky’s high-wing bush-plane layout on a grass surface.
The head-on view clearly shows the propeller, high wing, supporting struts and wide wheel stance.
The airborne angle displays the underside, fixed landing gear and full wing planform.
The side flight view presents the complete aircraft silhouette and high-visibility trim.
The close-up shows the nose, propeller hub, cowl graphics and forward fuselage finish.
The forward in-flight view shows the high wing, landing gear and fuselage alignment during flight.
| Wing Area | 47.7 dm² (739 in²) |
|---|---|
| Wing Loading | 49 g/dm² (0.1 oz/in²) |
| Center of Gravity | 80–90 mm from leading edge |
| Motor | 3948-550kV brushless |
| ESC | 50A with XT60 connector |
| Propeller | 13 × 7.5, two-blade |
| Servos | Six 23g metal-gear servos |
| Landing Gear | Fixed CNC landing gear |
| Required Battery | Up to 6S 3300mAh recommended |
| Required Radio | 6-channel transmitter and receiver |
| Controls | Ailerons, elevator and rudder |
| Flaps | Yes |
| Lights | Navigation and landing lights |
| Material | EPO foam |
| Estimated Flight Duration | 4–5 minutes |
| Build Time | Approximately 10–30 minutes |
| Gyro | Vector |
Completion level: PNP.
loading
