No items in your cart

NISMO R34 GT-R Z-Tune, 4WD OnRd TT02D Drift Spec - Scratch and Dent

Click any image for gallery view.

NISMO R34 GT-R Z-Tune, 4WD OnRd TT02D Drift Spec - Scratch and Dent

Tamiya SNDTAM58605
In Stock

Add to wishlist

Scratch and Dent - Open box, unused with some scuff marks on top of body. Originally $267.20.
  • NISMO R34 GT-R Z-Tune, 4WD OnRd TT02D Drift Spec - Scratch and Dent

    This is the 1/10 scale, electric powered, radio controlled,
    Tamiya TT02D Drift Spec Kit with the Nissan Nismo R34 G-T-R Z-Tune Body.


    Chassis: Plastic, bathtub type with skid shaped underside to
    minimize contact with the road surface
    Drive: Four wheel, shaft driven
    Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
    Electronic Speed Control: Tamiya TBLE-02S
    Differential: Gear type
    Tires: Slick rubber construction, Super Driftech 0.94" (24mm) wide
    Wheels: Silver colored mesh type, 1.9" diameter (48.2mm), 0.94"
    (24mm) wide, 12mm hex, +2° offset
    Ball Bearings: Shielded
    Suspension: Fully independent double wishbone
    Shocks: CVA Super Mini oil-filled plastic body
    Camber: Non-adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
    Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation to the
    Steering: Bellcrank type
    Body: Clear untrimmed Nissan Nismo R34 with decals and window
    Bumper: Front, foam


    Tamiya TT02D Drift Spec Chassis, with 540 Brushed Motor, Drift Tires,
    Clear Body, 70 tooth Spur Gear, 22 tooth Pinion, ESC, Decals,
    Window Masks, Instructions and Wheels


    Radio: 2-channel with high speed steering servo
    Battery: 7.2V NiMH
    Battery Charger: To match selected battery
    Building and track equipment


    Specs such as finished size and weight of vehicle not provided
    by manufacturer
    Length: 18.1" (460mm)
    Width: 6.9" (176mm) behind front wheels, widest point
    7.5" (190mm) at rear wheels, widest point
    Height: 4.2" (106mm)


    For replacement, Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
    2 5x11mm Spur Gear 1 DTXC1547
    2 5x11mm Driveshaft 1 DTXC1547
    2 8x12mm Rear Diff Assembly 1 DTXC1581
    2 5x10mm Front Uprights 1 DTXC1535
    2 5x10mm Rear Uprights 1 DTXC1535

Language Picker

  • English
  • Español


My Cart

No items in your cart