0

Cart

Item(s)
Qty
Price

No items in your cart

40-Amp Pro Switch-Mode BEC Brushless ESC (V2)

Click any image for gallery view.

40-Amp Pro Switch-Mode BEC Brushless ESC (V2)

E-flite EFLA1040B Brushless Speed Control
In Stock
$74.99

Add to wishlist
  • 40-Amp Pro Switch-Mode BEC Brushless ESC (V2)

    E-flite® 40-Amp Pro Switch-Mode BEC Brushless ESC (V2) is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

    Features

    • Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
    • 5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
    • Stronger BEC for support of most 3-axis stabilization systems
    • Drive up to 7 analog or 6 digital standard-sized servos with the BEC
    • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
    • Finned heat sinks
    • Programmable motor braking
    • Safe power-arm mode prevents accidental starts
    • Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 70% of battery starting voltage
    • Programmable throttle input range
    • Programmable soft start for helis and airplanes
    • Auto motor shut down if signal is lost or there is interference
    • Programmable timing—5 user-selectable ranges to use with a large variety of brushless motors
    • Utilizes new smaller Mosfet technology to minimize weight
    • Radio System Power ON /OFF Switch
    • Prewired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

    Specifications

    Type: Speed Control
    Length 68.0mm (2.70 in)
    Width: 33.0mm (1.30 in)
    Continuous Maximum Current: 40A (Proper cooling and airflow required)
    Weight: 62.0 g (2.20 oz)
    Height: 13.0mm (0.50 in)
    Input Connector Types: 13 AWG with E-flite EC3 Connector
    Input Voltage: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
    Momentary Peak Current: 55A (15 sec) (Proper cooling and airflow required)
    Output Connector Types: 13 AWG with 3.5mm Gold Bullet Connectors
  • Manuals and Support

  • Test 2

Language Picker

  • English
  • Español
X

Cart

0
My Cart

No items in your cart