Call Us Toll-Free! (888) 953-9663

Free shipping on orders over $99.* Complete details.




No items in your cart

30-Amp Pro Switch-Mode BEC Brushless ESC (V2)

30-Amp Pro Switch-Mode BEC Brushless ESC (V2)

30-Amp Pro Switch-Mode BEC Brushless ESC (V2)

E-flite EFLA1030B Brushless Speed Control
Ships in 3-4 days
  • 30-Amp Pro Switch-Mode BEC Brushless ESC (V2)

    The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.


    • Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
    • 3.5A continuous current, 5V Switch-Mode BEC Circuit
    • Stronger BEC for support of most 3-axis stabilization systems
    • Drive up to 7 analog or 6 digital standard-size servos with the BEC
    • 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
    • Programmable motor braking
    • Safe power-arm mode prevents accidental starts
    • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
    • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
    • Programmable soft start for helis and airplanes
    • Auto motor shut down if signal is lost or there is interference
    • Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
    • Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads


    Speed Control
    51.0mm (2.00 in)
    28.0mm (1.10 in)
    Wire Gauge:
    16 AWG
    Continuous Maximum Current:
    30A (proper cooling required)
    31.0 g (1.10 oz)
    8.70mm (0.35 in)
    Input Connector Types:
    16 AWG leads with E-flite EC3 Connector
    Input Voltage:
    3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
    Momentary Peak Current:
    35A (15 sec)
    Output Connector Types:
    16 AWG leads with 3.5mm Gold Bullet Connectors
  • E-flite 30-Amp Pro Switch-Mode BEC Brushless ESC (V2) Hop-Ups & Optional Accessories (2 items)

  • Manuals and Support

Language Picker

  • English
  • EspaƱol