No items in your cart

10-Amp Pro Brushless ESC

Click any image for gallery view.

10-Amp Pro Brushless ESC

E-flite EFLA1010 Brushless Speed Control
Out of Stock

Add to wishlist
  • 10-Amp Pro Brushless ESC

    This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2–3 cell Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power-arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.


    • Up to 10-amp continuous current with proper air flow
    • Programmable motor braking
    • Safe power-arm mode prevents accidental starts
    • Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
    • Programmable throttle input range (1.1ms–1.9ms or Auto Select)
    • Auto motor shutdown if signal is lost or there is interference
    • Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
    • Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
    • Soft start


    Type: Speed Control
    Length 1.2 in (30mm)
    Width: 0.7 in (17.5mm)
    Continuous Maximum Current: 10A
    Weight: 0.35 oz (10 g)
    Brake: Yes - programmable
    Cells w/ BEC: 2–3S Li-Po or 6–10 Ni-MH/Ni-Cd
    Height: 0.4 in (10mm)
    Input Connector Types: 20AWG with JST connector
    Momentary Peak Current: 12A (15 sec)
    Output Connector Types: 20AWG with 2mm female gold bullet connectors
  • E-flite 10-Amp Pro Brushless ESC Parts List (1 items)

  • E-flite 10-Amp Pro Brushless ESC Hop-Ups & Optional Accessories (2 items)

  • Manuals and Support

Language Picker

  • English
  • Español


My Cart

No items in your cart