E-flite Power 60 Brushless Outrunner Motor, 400Kv-EFLM4060A

EFLM4060A
Low inventory
€150,81 EUR
Shipping fees will be calculated at checkout.
Quantity
Secure Payment Options
PayPal
Pay Later
Apple Pay

Available payment methods may vary by location, device, and order details.

Free Shipping Over $99
30 Day Return
90 Day Warranty

Overview

Needed To Complete

  • 80A brushless ESC
  • 5S–7S Li-Po or 16- to 24-cell Ni-MH/Ni-Cd
  • 14x8 to 16x10 prop

The Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg), 46-size 3D airplanes up to 7 pounds (3.2 kg), or models requiring up to 1200 watts of power. It’s an especially good match for Hangar 9 .60-size warbirds like the Corsair 60 (HAN2575), P-47D Thunderbolt 60 (HAN2975), P-40 Warhawk 60 (HAN2850), P-51 Mustang 60 (HAN2375), P-51 Miss America 60 (HAN2775) and .46-size 3D planes such as the Hangar 9 Funtana 40 (HAN1975) or Seagull Harrier 46 (SEA3025).

Examples of Airplane Setups:

NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.

Hangar 9 P-51 Miss America (HAN2775)

Motor: Power 60
ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)
APC 15x10E
Battery: Thunder Power PRO LITE 6000mAh 6S3P (THP60003S3PPL x2 in series)
Flying Weight w/Battery: 8.8 lb

AmpsVoltsWattsInput Watts/PoundRPM
56.021.311951367375

Expect very strong performance with a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management.


Seagull Harrier 3D 46 (SEA3025)

Motor: Power 60
ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)
Prop: APC 16x8E
Battery: Thunder Power PRO LITE 4200mAh 6S2P (THP42003S2PPL x2 in series)
Flying Weight w/Battery: 6.4 lb

AmpsVoltsWattsInput Watts/PoundRPM
50.521.010601656975

Expect very strong performance with unlimited vertical and plentiful power for hovering and 3D aerobatics. Average duration is approximately 8 to 15 minutes depending on throttle management.

Key Features

  • Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
  • Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
  • Ideal for models requiring up to 1200 watts of power
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Includes mount, prop adapters and mounting hardware
  • External rotor design—6mm shaft can easily be reversed for alternative motor installations
  • Slotted 14-pole outrunner design
  • High-quality construction with ball bearings and hardened steel shaft
  • NOTE: Not recommended to use with E-flite 80-Amp Pro Switch-Mode ESC (EFLA1080B)
  • Quiet, lightweight operation
  • 80A brushless ESC
  • 5S–7S Li-Po or 16- to 24-cell Ni-MH/Ni-Cd
  • 14x8 to 16x10 prop

Key Specs

Connector Type
3.5mm Bullet
Adjustable Timing
No
Bushing Or Bearing
Bearing
Idle Current (Io)
2.70A @ 10V
Motor Design
Outrunner
Motor Type
Brushless
Outer Diameter
2 in (50mm)
Recommended Prop Range
14x8 to 16x10

Specifications

Connector Type3.5mm Bullet
Adjustable TimingNo
Bushing Or BearingBearing
Idle Current (Io)2.70A @ 10V
Motor DesignOutrunner
Motor TypeBrushless
Outer Diameter2 in (50mm)
Recommended Prop Range14x8 to 16x10
RPM/Volt (Kv)400
Shaft Diameter6mm (.24 in)
Voltage18.5 to 28.8
Wire Gauge14 AWG

Compatibility

This replacement part is used in the following complete models.

Recently viewed

Cart

loading