XL10 Electronic Speed Control
This is the Traxxas XL-10 Forward and Reverse Electronic Speed Control.
4-7 cell operation for electric vehicles.
EZ-Set pushbutton setup
Efficient low loss MOSFET design with heavy gauge low loss wire
Thermal shutdown protection with 150A rated peak circuit
Traxxas XL-10 Forward and Reverse Electronic Speed Control with
Traxxas molex connector and instruction manual
Connecting to motor and battery of vehicle
Adapter depending on type of battery connector may be required
On Resistance Forward: 0.006 Ohms
On Resistance Reverse: 0.006 Ohms
Peak Current-Fwd/Rev: 150A/150A
Braking Current: 75A
Continous Current: 30A
BEC Voltage: 6.0VDC
BEC Current: 1000mA
Power Wire: 14AWG/ 5"
Input Harness Type: 26AWG/ 9"
Transistor Type: MOSFET
PWM Frequency: 2000Hz
Thermal Protection: Thermal Shutdown
Single Button Setup: Yes
Motor Limit: 10T (540 Size)
Input Voltage: 4-7 Cells (4.8V to 8.4V DC)
Weight: 2.26oz
Profile Selection: 100% FWD, 100% Brakes, 100%REV
100% FWD, 100% Brakes, No REV
100% FWD, 100% Brakes, 25% REV
Features
- 10-turn motor limit for 540 size motors
- High-frequency operation for smooth throttle control
- Fully-proportional forward, reverse, and braking control
- Programmable with three drive profiles
- EZ-Set® push-button setup
- Multi-color LED
- Thermal shutdown protection
- Efficient, low-loss MOSFET design
- High-capacity heat sink
- Smooth, high-frequency operation
- Easy installation in Traxxas models
Type: Speed Control
Length 1.80 in (45.7mm)
Width: 1.23 in (31.2mm)
Continuous Maximum Current: 30A
Weight: 2.71 Ounce
Auto Cutoff: Thermal
BEC Voltage: 6.0 VDC
Brake: Y
Dimensions (WxLxH): 1.23"W x 1.80"L x 0.61" H
Forward: Y
Full On Resistance: 0.006 Ohms
Height: 0.61 in (15.5mm)
Input Voltage: 4-7 Cells (4.8 to 8.4 Volts DC)
Momentary Peak Current: 150A
Motor Limit: 10-turns* (540 Size)
PWM Frequency: 1600 Hz
Reverse: Y