NexSTAR .46 Trainer ARF

Click any image for gallery view.

NexSTAR .46 Trainer ARF

Hobbico HCAA2025 Airplane Nitro/Gas ARF
Out of Stock ETA: 02/10/2014
$149.99

Add to wishlist

  • NexSTAR .46 Trainer ARF

    This is the radio controlled, glow powered, Almost Ready-to-Fly,
    Hobbico NexSTAR .46 trainer airplane.
    For Beginner Modeler/Fliers.

    ** This version does not include a radio, pilot assist link, engine, **
    NexSTAR Simulation Software, and the learn-to-fly guarantee.

    With such features as SpinControl
    Airfoil Extensions, SpeedBrakes and Training Flaps
    no other trainer offers so much help for the first-time pilot.

    Features

    Construction: Balsa and plywood
    Wings: CenterCore Molded Composite Main Wing Rib maintains perfect
    alignment and includes a built-in aileron servo mount, wing halves
    are joined with a steel rod.
    Flat bottom high mount configuration
    One-piece, all wood precision airfoil with SpinControl Airfoil
    Extensions that provide lift even in a stall to keep the
    NexSTAR level and the pilot in control.
    PivotFlex Wing Mounting System fastens with one 1/4-20x2 nylon wing
    bolt (GPMQ4402),a rubber retainer and pivoting channel absorb minor
    jolts of normal use, more severe jolts cause the wing to separate
    from the fuselage and escape the full force of impact.
    Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward
    section of wing near fuselage and hold airspeed to a minimum to
    insure smooth landings, removeable as pilot skills increase
    Covering: Polyester based heat shrink, color scheme is White and Red
    with Silver accents. True Red TOPQ0227
    Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts,
    (US Patent #6,886,780) lock in place with a snap and provide the
    strongest landing gear of any trainer, also easily removeable
    Aileron Control: Requires single standard size servo, wings are built
    with dual aileron servo trays for future upgrades as skills
    increase, can also be equipped with flaps
    Tail Mounting: EasyAlign System guides parts into place automatically
    in perfect alignment without tools
    Building Time: Ready to fly in 3-5 hours
    Warranty Period: Hobbico guarantees this kit free from defects in
    both material and workmanship at purchase date. This warranty
    does not cover any component part damaged by use or modification.

    Includes

    Pre-built and covered wings, fuselage and tail assemblies,
    pre-bent main landing gear with three 2¾" (70mm) foam main
    wheels, steerable nose gear, IsoSmooth aluminum and rubber engine
    mount, 9.1oz (270cc) fuel tank, 2¼" (57mm) red plastic spinner
    pushrods, linkages, and photo-illustrated instructions

    Requires

    Radio: 4-channel
    Servos: Four standard size (1-throttle, 1-rudder, 1-elevator,
    1-aileron)
    Engine: .46 cu in (7.5cc) engine (*see comments below)
    Model airplane fuel
    Building and field equipment
    Charging Rx and Tx batteries

    Specifications

    Wingspan: 68.75" (1746mm)
    Wing Area: 722 sq in (46sq dm)
    Weight: 6.5lb-6.75lb (2835g-3060g) ready to fly
    Wing Loading: 20-21 oz/sq ft (61-66g/sq dm)
    Length: 56" (1420mm)
    Airfoil: High-Wing
    Center of Gravity: 3-3/16" (81mm) forward limit
    3-9/16" (90mm) aft limit from the wing's leading
    edge at the fuselage sides
    Control Throws-
    Elevator: Up & Down ½" (13mm)
    Rudder: Right to Left ¾" (19mm)
    Ailerons: Up ½" (13mm) Down 3/8" (9mm)

    Right Thrust Angle-3°
    Down Thrust Angle-4° wing respect to wing incidence

    OMMENTS: Wings are equipped with dual aileron servo trays if dual aileron
    servos are desired. If you wish to use flaperons you will need to
    upgrade your radio system to 6 channels. The instruction manual
    list parts needed and information to perform these conversions.

    The metal straps described on page 13 for the engine mount are not
    included with the kit.

    If a replacement fuel tank is needed, an 8oz (240cc) tank like
    SULQ1739 can be used. Some minor modification may be needed as this
    is not the exact shape of the original tank

    *Because the .46LA dimensions are different than a bearinged engine,
    it will not work in this plane unless modifications are made. You
    will need a different engine mount. Depending on which engine
    mount is used, you may need to add aprox. 1/4" to 3/8" plywood
    to the firewall to extend the prop forward enough to keep it from
    contacting the fuselage.

    *If a Tower .46 is being used, you will need to use an muffler
    extension. The Dubro 699 Muffler Extension DUBG1319 will work fine.

    tower .46 updt tjt 071305
  • NexSTAR .46 Trainer ARF - Reviews

    Write a Review

    There are currently no reviews for NexSTAR .46 Trainer ARF, but you can be the first!

  • Hobbico NexSTAR .46 Trainer ARF Parts List (13 items)

  • Hobbico NexSTAR .46 Trainer ARF Hop-Ups & Optional Accessories (13 items)

  • Manuals and Support

  • Test 2

Language Picker

  • English
  • Español
X

Your Cart

0
My Cart

No items in your cart