This is the 2.4GHz Radio Controlled, Brushless Electric Powered, Ready to Fly Sensei FS Trainer Airplane with WISE Flight Stabilization System from Flyzone.
Stabilization System: WISE 3-axis with three flight modes; Beginner Intermediate, Advanced and Bailout Switch that immediately returns aircraft to straight and level flight from any orientation and from any of the three flight modes Construction: AeroCell foam with pre-applied trim scheme, drop door in fuselage opens from 5th channel of radio Wing: Two-piece bolt together Motor: Brushless outrunner Radio: 6-channel 2.4GHz Tactic TTX610 system with SLT receiver and five micro servos LiPo Battery: 3S 2100mAh Battery Charger: AC/DC powered with balancing capability Landing Gear: One-piece aluminum, 2.5" (63mm) diameter main and nose gear wheels, prebent wire nosegear Drop Door: Near main landing gear in fuselage, operates from 5th channel for inflight deployment of parachute, candy or other items Tail Section: Self-aligning, attaches to fuselage with one screw
RTF Sensei FS Trainer Airplane with WISE Flight Stabilization, Motor, ESC, Battery, Radio, five Micro Servos, four AA Batteries
Pliers and phillips screwdriver for assembly
Wingspan: 58" (1475mm) Length: 48" (1220mm) Weight: 3.2lbs (1450 g) Center of Gravity (CG): 1/4" (6.4mm) forward or aft of the center of the circle on each wing bottom Control Throws- Elevator (up & down): 1/2" (15mm) Rudder (right &left): 5/8" (16mm) Ailerons (up & down): 1/2" (15mm)
AeroCell™ foam airframe with molded-in detail and pre-applied trim scheme
WISE 3-axis flight stabilization system
Simple, screw-together assembly — no gluing required