No items in your cart

Corsair F4U-1A Select Scale RTF 2.4GHz

Click any image for gallery view.
  • Corsair F4U-1A Select Scale RTF 2.4GHz

    This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Fly,
    Select Scale F4U Corsair from Flyzone.


    Construction: AeroCell foam, factory painted, molded-in panel lines
    Motor: Brushless 35-36-920kV
    Landing Gear: Rotating retractable with functional doors
    Radio: 2.4GHz Tactic TTX600 6-channel with digital trim, trainer
    system, SLT receiver, five micro servos and four AA batteries
    Battery: 3S 11.1V 2100mAh LiPo *If replacing battery with the battery
    listed in optionals, the Star Plug Male to SuperTigre ESC Connector
    (SUPM0040) must be purchased
    Battery Charger: ElectriFly DC LiPo balancing charger
    Propeller: 12x6 plastic, black in color


    RTF F4U Corsair with Brushless Power System, 2.4GHz Radio, Battery,
    Charger, four AA Cells, LED Navigation Lights, Pilot Figure,
    Replica Radial Engine and Instruction Manual


    Wingspan: 48.5" (1230mm)
    Wing Area: 426 sq in (27.5 sq dm)
    Wing Loading: 16 oz/sq ft (49 g/sq dm)
    Length: 38.5" (980mm)
    RTF Weight: 48 oz (1360 g)
    Center of Gravity (CG): 2-7/8" (73mm) from the leading edge of the
    wing at the fuselage sides
    Control Throws: Low Rate High Rate
    Elevator Up & Down: 5/16" (8mm) 7/16" (11mm)
    Ailerons Up & Down: 11/16" (17.5mm) 7/8" (22mm)
    Rudder R & L: 13/16" (21mm) 1-1/4" (32mm)

    Videos on YouTube

  • Flyzone Corsair F4U-1A Select Scale RTF 2.4GHz Parts List (16 items)

  • Manuals and Support

  • Corsair F4U-1A Select Scale RTF 2.4GHz - Reviews

       Write a Review

    What a great plane!!






    The first thing I wanted to say about this plane is that I am amazed with the detail I'm building it. It is a very well designed plane. You can replace and get to every piece of the plane you could imagine. I've crashed this plane into the ground, which ended up bending the landing gear.  I was able to take the gear out of the plane, and not only that but take all the pieces off of the metal rod to re-bend it. It's super durable and parts are reasonable. I've had a handful of planes and this one by far is the easiest to work on. Very user friendly. I would recommend it to anyone. 

    Steer75 - NH
    What type of hobbyist are you?
    How often do you use this product?
    Several times a week
    What is your age?
    Under 15
    How long have you been participating in this hobby?
    11-20 years
    Was this review helpful? Yes (0) No (0)
  • Test 1

Language Picker

  • English
  • Español


My Cart

No items in your cart