Originally developed for the U.S. Air Force and approved for production more than 40 years ago, the F-16 Falcon brought advances in fighter technology and capabilities that still top many of the aircraft flown by adversaries today. Its record of success with allied countries is outstanding, and it's expected to be in service with air forces worldwide for many years to come. E-flite® pays tribute to the full-scale fighter with the F-16 Falcon 64mm EDF jet that delivers incredible performance in a size suited for smaller flying sites. It's also one of the easiest and most fun to fly Falcon models yet when it's equipped with AS3X® and SAFE® Select technologies.
The E-flite® F-16 Falcon 64mm EDF jet is a scale replica of one of the most recognized and successful single-engine fighters in the world. Its 4S-compatible high-RPM brushless motor is matched to a 40-amp ESC and high-thrust 11-blade fan unit to deliver incredible performance enhanced by a realistic, turbine-like sound. Integrated composites and advanced EPO material form a lightweight, durable airframe that offers precise handling with the factory-installed servos. Nose-wheel steering provides easy ground handling – or you can remove the landing gear entirely for improved scale appearance and performance, plus nearly effortless hand launches when flying over grass. Authentic scale touches include molded-in surface details, a cockpit with pilot figure, plus optional-use simulated external fuel tanks and ordnance. It also arrives factory-finished in a unique scale trim scheme that offers great visibility and makes a strong impression both on the ground and in the air. And it all combines to deliver one of the easiest and most fun to fly Falcon models ever!
This F-16 model is equipped with exclusive Spektrum® AS3X® and SAFE® Select technologies. AS3X works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much larger jet. Optional-use SAFE Select offers pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch making this one of the easiest to fly Falcons yet! And if you don't want to enable the SAFE Select features, simply bind the receiver normally and only AS3X will be active.
The 11-blade 64mm fan, high-RPM brushless motor and 40-amp ESC combine with your 4S 2200mAh LiPo battery to deliver great vertical performance and a fantastic speed range with virtually instantaneous throttle response. But what makes the experience truly rewarding is the fantastic sound produced by the power system – it's almost like a real turbine.
You can install the included fixed landing gear with steerable nose wheel to taxi, take off and land on smooth surfaces. Or you can leave the landing gear off for more speed and vertical performance plus easy hand launches when flying over grass.
Unique Trim Scheme
The factory-applied paint and decal finish replicates the 65th anniversary trim scheme used by the Texas Air National Guard's 149th Fighter Wing – the Lone Star Gunfighters.
Construction with molded EPO material makes it possible to replicate complex detail and shapes in a lightweight yet durable form. The result is an outstanding scale appearance that's easy to maintain and delivers the best possible flight experience.
Although the F-16 Falcon 64mm EDF is compact enough to transport in just about any vehicle in one piece, it features bolt-on wings and a magnetically-secure nose cone that are easy to remove/install for even more convenient transport and storage.
Approximate Assembly Time: Less than 1 Hour
CG (Center of Gravity): 3.5 - 3.7" (90 - 95mm) back from leading edge of wing measured at the fuselage
Charger: Sold Separately
Completion Level: Bind-N-Fly Basic
Control Throw - High (Ailerons): Up/Down 0.59" (15mm)
Control Throw - High (Elevator): Up/Down 0.79" (20mm)
Control Throw - Low (Ailerons): Up/Down 0.31" (8mm)
Control Throw - Low (Elevator): Up/Down 0.31" (8mm)
Expo (Ailerons): High Rate 10%, Low Rate 0%
Expo (Elevator): High Rate 10%, Low Rate 0%
Fan Size: 64mm, 11 blade
Flying Weight: 31.75oz (900g)
Landing Gear: Yes
Length: 43.3" (1099mm),1099mm
Minimum Required Radio: 4-Channel
Minimum Speed Control: 40A Installed
Motor Size: 2840 3150Kv
Recommended Motor Battery: 4S LiPo 2200mAh 30+C LiPo with EC3 or IC3 Connector
Servos: Five Micro Included,Five Micro Included
Transmitter Range: Full Range Transmitter Required
Wing Tube Length: 13.8" (350mm)
Wingspan: 28.7" (729mm),729mm
One of the easiest and most fun to fly F-16 Falcon EDF (Electric Ducted Fan) jet models yet
Scale replica of the world-renowned fighter flown by the U.S. and numerous allied air forces
11-blade 64mm fan delivers great vertical performance and top speed plus turbine-like sound
Factory-installed high-power 4S-compatible brushless motor, 40-amp ESC and 5 servos
Durable yet lightweight molded EPO airframe
Magnetically-secured nose cone and top hatch
Spektrum™ AR636 6-channel receiver with industry-leading 2.4GHz DSMX® technology
Easy to fly with innovative and optional-use SAFE® Select flight envelope protection
The unmatched stability and locked-in feel of exclusive AS3X® technology
Optional-use fixed landing gear with steerable nose wheel
Bolt-on wings plus optional-use tanks and ordnance
You Will Need
Full-range, 5+ channel transmitter with Spektrum™ DSMX®/DSM2® technology
4S 14.8V 2200mAh 30+C LiPo battery with EC3™ or IC3™ Connector
Compatible LiPo charger
Videos on YouTube
E-flite F-16 Falcon 64mm EDF BNF w/AS3X & SAFE Select Parts List (22 items)