0

Cart

Item(s)
Qty
Price

No items in your cart

VoltWatch2 4.8V/6V Rx Battery Monitor

Click any image for gallery view.

VoltWatch2 4.8V/6V Rx Battery Monitor

Hobbico HCAP0332 Rx Battery
In Stock
$19.99

Add to wishlist
  • VoltWatch2 4.8V/6V Rx Battery Monitor

    This is the VoltWatch2 on-board Receiver Battery Monitor for
    4.8V and 6V NiCd and NiMH receiver packs.
    This mounts on the outside of the airplane, so you can see at a glance
    the status of the receiver battery mounted inside.

    Features

    7-LEDs provide instant, accurate battery voltage status of Low, Safe,
    or Max. Only one LED glows at a time
    Small switch to select 4.8V or 6V battery
    Very lightweight, only .15oz (4.3g) unit can mount on the side
    of the fuselage, or under the plane's canopy
    Draws amazingly low current - from 4-34mA depending on the battery
    voltage
    Plugs into any open receiver channel using a Futaba J connector
    One year warranty

    Includes

    One VoltWatch2 On-Board Receiver Battery Monitor w/Futaba J plug
    One 1.5"x1" piece of double sided mounting tape

    Requires

    Plugging into any unused receiver port
    Mounting onto the airplane with double-sided tape

    Specifications

    Length: 1.65" (42mm)
    Width: .63" (16mm)
    Height: .16" (4mm)
    Weight: .15oz (4.3 grams)
    Current Draw: approx 4-34mA
    Lead Length: 198mm (7.79")

    Comments

    This has a Futaba J connector pre-installed. For radios other than
    Futaba, you will have to change or modify the plug.
    Because of reverse polarity, if you would like to use this with the
    older Airtronics batteries, you must also purchase AIRM4400

  • Test 1

Language Picker

  • English
  • Español
X

Cart

0
My Cart

No items in your cart