No items in your cart

.35AX ABL 21K Carb E3080 Muffler

Click any image for gallery view.

.35AX ABL 21K Carb E3080 Muffler

O.S. Engines OSMG0545 Airplane Engine Nitro
In Stock

Add to wishlist
  • .35AX ABL 21K Carb E3080 Muffler

    This is the O.S. .35AX ABL Model Airplane Engine with E-3080 Muffler.
    Ideally suited to a variety of R/C aircraft including trainer, sport types.


    Same mounting dimensions as the O.S. .32SX and .25FX
    Weighs only 0.35oz (10g) more than the .32SX
    Advanced Bi-Metallic Liner. This process uses a double layer of
    plating material rather than one thick layer. This helps the metal
    to bond to the cylinder and is more durable. Also, the plating
    process is more consistent, resulting in a more precise fit between
    piston and sleeve for better compression, longer life.
    Newly designed E-3080 Power Box muffler generates mild and pleasant
    sound and is constructed with an O-ring between the front and
    rear body to prevent oil leaking and is fully positionable
    21K carburetor with needle valve angled toward rear of engine for
    safer adjustments
    Ball bearing-supported crankshaft
    Two-year limited warranty


    One O.S. Max .35AX ABL BB model airplane engine with muffler, #8 glow
    plug, two 3x28mm cap head muffler screws, needle valve extension
    cable, warranty sheet, decal sheet and illustrated instruction


    Fuel containing 5%-20% nitromethane with at least 16% lubricant


    Displacement: 0.352 cu in (5.77cc)
    Bore: 0.795" (20.2mm)
    Stroke: 0.709" (18.0mm)
    Practical RPM: 2,500-17,000
    Output: 1.3 PS, 1.28 HP @ 16,000
    Weight: 12.8oz (363g) with muffler
    Recommended Propellers: 10x6, 10x7, 11x6, 12x6 (10x6 for break-in)
    Crankshaft Size: 1/4-28

    Distance from center of engine to drive hub: 2.1" (53mm)
    Distance from center of engine to end of crankshaft: 3.1" (77mm)
    Distance/crankshaft center to muffler exhaust outlet: 3.8" (96.2mm)
    Height from crankcase bottom to top of cylinder head: 3.02" (76.9mm)
    Height/mounting tab to top of cylinder head: 2.4" (61.5mm)
    Width including mounting tabs: 1.8" (45mm)
    Crankcase width below mounting tabs: 1.2" (30.6mm)
    Width between mounting holes same side: 0.59" (15mm)
    Width between mounting holes opposite side: 1.5" (38mm)
    Diameter of muffler body: 1.2" (32mm)

    Needle Settings: High Speed: 2 turns out from fully closed
    Low Speed: Flush with carb body then 1/2 turn in

  • O.S. Engines .35AX ABL 21K Carb E3080 Muffler Parts List (1 items)

  • O.S. Engines .35AX ABL 21K Carb E3080 Muffler Hop-Ups & Optional Accessories (1 items)

  • Manuals and Support

Language Picker

  • English
  • Español


My Cart

No items in your cart