No items in your cart

NexSTAR .46 Select RTF

Click any image for gallery view.

NexSTAR .46 Select RTF

Hobbico HCAA17** Airplane Nitro/Gas RTF
Out of Stock

Add to wishlist

Originally $479.99. Reduced from $399.99 October 16, 2017.
  • NexSTAR .46 Select RTF

    This is the radio controlled, glow powered, Ready-To-Fly,
    Hobbico NexSTAR Select .46 trainer airplane.
    For Beginner Modeler/Fliers.

    With such features as AFS (Active Flight Stabilization), SpinControl
    Airfoil Extensions, SpeedBrakes Training Flaps and much more,
    no other trainer offers so much help for the first-time pilot.

    In addition to the airplane, radio, and engine, this package also includes
    a RealFlight NexSTAR Windows PC disc with transmitter interface
    to use with the included Futaba radio allowing the modeler to
    practice and perfect their skills without risking the airplane.

    Windows XP, 2000, Me or 98 Second Edition
    **NOT Compatible with Windows Vista or Windows 7**
    NOTE: Window 98 First Edition is not supported with the NexSTAR
    simulation software
    Intel Pentium 300 Processor or equivalent
    3D accelerated video card with 8MB (or more) RAM

    Intel Pentium 600 or equivalent
    STRONG RECOMMENDATION of 3D accelerated video card with 16MB (or more) RAM

    NOTE: The NexSTAR disk included in this kit is NOT compatible with
    any version of the RealFlight Add Ons Volumes.


    Construction: Balsa and plywood
    Wings: CenterCore Molded Composite Main Wing Rib maintains perfect
    alignment and includes a built-in aileron servo mount, wing halves
    are joined with a steel rod.
    Flat bottom high mount configuration
    One-piece, all wood precision airfoil with SpinControl Airfoil
    Extensions provide lift even in a stall to keep the NexSTAR level
    and the pilot in control.
    PivotFlex Wing Mounting System fastens with one nylon bolt, a
    rubber retainer and pivoting channel absorb minor jolts of
    normal use, more severe jolts cause the wing to separate from the
    fuselage and escape the full force of impact.
    Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward
    section of wing near fuselage and hold airspeed to a minimum to
    insure smooth landings, removeable as pilot skills increase
    Covering: Polyester based heat shrink, color scheme is White and Red
    with Silver accents. True Red TOPQ0227
    Engine: Pre-installed O.S. Max .46AX (7.5cc) with High-Speed
    Needle Valve extender/limiter that limits the movement of the
    High-Speed Needle to prevent engine from being run too lean.
    Engine is mounted on IsoSmooth Mount to isolate airframe and
    radio gear from damaging vibration
    Radio: Futaba T6EXAP 6-channel with square trainer port
    AFS (Active Flight Stabilization) that actively searches for any
    signs of instability and takes immediate action to correct them.
    This system uses on-board electronic sensors that detect
    instability-just release the sticks and AFS does the rest.
    Sensitivity is adjustable as pilot gains flight skills.
    Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts (US
    Patent #6,886,780) lock in place with a snap and provide the
    strongest landing gear of any trainer, also easily removeable
    Aileron Control: Single standard size servo, wings are built with
    dual aileron servo trays for future upgrades as skills increase,
    can also be equipped with flaps
    Tail Mounting: EasyAlign System guides parts into place automatically
    in perfect alignment without tools
    Propeller: 11x5 nylon, black in color with painted tips to aid
    visibility-available separately, HCAA3744
    Building Time: Ready to fly in only 20 minutes
    Warranty Period: Hobbico guarantees this kit free from defects in
    both material and workmanship at the date of purchase. This
    warranty does not cover any component part damaged by use or

    The NexSTAR also carries the Success Flight Guarantee which states"
    "You will successfully learn how to fly with the NexSTAR or we will
    replace it with your choice of any Hobbico trainer of up to equal
    value." The terms are as follows:

    - Must fly at an AMA chartered field
    - Must fly with a qualified AMA club instructor
    - Must be within 60 days of purchase date
    - Must provide a statement about the crash with signatures from the
    pilot and instructor

    The Success Flight information is covered on pg 27 of manual.


    Pre-built and covered wings, fuselage and tail assemblies,
    2-56 threaded pushrods in lengths of 31", 31", 17", 15" (GPMQ3716)
    pre-bent main landing gear with three 2¾" (70mm) foam main
    wheels, steerable nose gear, IsoSmooth aluminum and rubber engine
    mount, 9.1oz (270cc) fuel tank, 2¼" (57mm) plastic spinner
    glow plug, 11x5 nylon propeller, RealFlight NexSTAR disc with
    transmitter interface, O.S. Max .46 AX engine, Futaba T6EXAP
    6-ch radio system with TX battery RX battery, charger,
    AFS Dual Conversion Receiver,linkages, and
    and photo-illustrated instructions.


    Model airplane fuel
    Building and Field Equipment
    Charging Rx and Tx batteries with included charger for 12 hours each


    Wingspan: 68.75" (1746mm)
    Wing Area: 722 sq in (46sq dm)
    Weight: 6.5lb (2930g) Ready To Fly
    Wing Loading: 21 oz/sq ft (63g/sq dm)
    Length: 56" (1420mm)
    Airfoil: High-Wing
    Center of Gravity: 3-3/16" (81mm) forward limit
    3-9/16" (90mm) aft limit from the wing's leading
    edge at the fuselage sides
    Control Throws-
    Elevator: Up & Down ½" (13mm)
    Rudder: Right to Left ¾" (19mm)
    Ailerons: Up ½" (13mm) Down 3/8" (9mm)

    Degrees Incidence: Engine Thrust: 5° right
    Stabilizer: 0°
    Wing: -2°


    Parts list for O.S. .46 AX Engine
    Needle assembly: OSMG6980
    Rear Bearing: OSMG3086
    Crankcase: OSMG4210

    The Great Planes 2¼" Nylon Spinner in White (GPMQ4515), Black
    (GPMQ4516) and Red (GPMQ4517) can be used as a replacement
    spinner. If using the prop supplied with the NexSTAR, care must
    be taken to trim and sand each opening equally in the spinner
    cone to maintain balance.

    Also available without radio, engine or NexSTAR simulation
    software, HCAA2025.

    If a replacement fuel tank is needed, order the Sullivan 8oz
    tank (SULQ1739), or the DuBro 8oz tank (DUBQ0208). These are 1oz
    smaller than the tank supplied with kit.
    Some minor trimming and modifications may be required.

    Damage to covering can be repaired with Top Flite MonoKote.

  • NexSTAR .46 Select RTF - Reviews

    Write a Review

    There are currently no reviews for NexSTAR .46 Select RTF, but you can be the first!

  • Hobbico NexSTAR .46 Select RTF Parts List (16 items)

    • Great Planes GPMQ4204 Landing Gear / Wheels
      Out of Stock

      Great Planes Ultralite Wheels are precision trued tires that add as little weight as possible to your model and help absorb … Read More

    • Great Planes GPMQ4276 Landing Gear / Wheels
      Out of Stock

      These are Bolt-On Axle Shafts for Aluminum Main Landing Gear. Includes Two Axles Two Nuts Specifications Axles- Axle Length: 1& … Read More

    • Great Planes GPMQ4402 Hardware
      In Stock

      Nylon Wing Bolts are a great way to hold your wing onto the airplane. Features Tough nylon construction make them perfect for … Read More

    • Hobbico HCAA3736
      Out of Stock

      This is the Wing Set for the Nexstar Select (HCAA17**) Features Pre-covered wood frame wing Pre-installed ailerons Includes One … Read More

    • Hobbico HCAA3737
      Out of Stock

      This is a set of replacement Spin Control Airfoil Extensions and Speedbrakes Training Flaps for the Hobbico NexSTAR (HCAA17**). … Read More

    • Hobbico HCAA3738
      Out of Stock

      This is the replacement Fuselage for the Hobbico Nexstar Select airplane (HCAA17**). Features Pre-built balsa and plywood … Read More

    • Hobbico HCAA3739
      Out of Stock

      This is the replacement Aluminum Engine Mount for the Hobbico NexSTAR Select RTF airplane - HCAA17** Features Sturdy aluminum … Read More

    • Hobbico HCAA3740
      Out of Stock

      This is the Isosmooth mounting parts for the Hobbico NexSTAR Select RTF airplane - HCAA17** Features Sturdy mounting pads with … Read More

    • Hobbico HCAA3741
      Out of Stock

      This is the replacement Tail Set for the Hobbico NexSTAR Select model airplane (HCAA17**). Features Balsa and plywood … Read More

    • Hobbico HCAA3742
      Out of Stock

      This is the replacement Landing Gear set for the Hobbico NexSTAR Select RTF airplane HCAA17**. Features Duraluminum construction … Read More

    • Hobbico HCAA3743
      Out of Stock

      This is a replacement Decal Sheet for the Hobbico NexSTAR Select RTF (HCAA17**). Features Adhesive backed design Decals are pre- … Read More

    • Hobbico HCAA3744
      Out of Stock

      This is the Prop for the Hobbico NexSTAR Select, HCAA17**. Features Black nylon construction with 1-1/2" red tips on … Read More

    • Hobbico HCAA3745
      Out of Stock

      This is the Center Corner Wing Joiner for the Hobbico Nexstar, HCAA17**. This joiner aligns the wing halves, serves as a … Read More

    • Hobbico HCAA3746
      Out of Stock

      This is the Pivot Flex Wing Mounting Bracket for the Hobbico Nexstar. Features White plastic construction Pivot flex retaining … Read More

    • Hobbico HCAA3747
      Out of Stock

      This is the replacement Fuel Tank for the NEXSTAR .46 SELECT RTF HCAA17** and the NEXSTAR .46 TRAINER ARF HCAA2025, Features … Read More

    • Hobbico HCAA3748
      Out of Stock

      These are the Tail Mounting Screws for Nexstar Select and ARF. Features White nylon construction Includes Two tail mounting … Read More

  • Hobbico NexSTAR .46 Select RTF Hop-Ups & Optional Accessories (11 items)

    • Great Planes GPMQ3326 Hardware
      Out of Stock

      These are Great Planes' 6-32 Blind Nuts. Features Metal construction with zinc plating to prevent rust from oxidizing on parts. … Read More

    • Great Planes GPMQ4204 Landing Gear / Wheels
      Out of Stock

      Great Planes Ultralite Wheels are precision trued tires that add as little weight as possible to your model and help absorb … Read More

    • Great Planes GPMQ4260 Landing Gear / Wheels
      Out of Stock

      This is a Nosegear assembly for replacing the exsisting gear or adapting an airplane to a front nose gear set up. It includes … Read More

    • Hobbico HCAP0700 Glow Starter
      In Stock

      This is the Hobbico 1.5 Volt Hobby Battery. Features Great for Model Glow Engines Screw-On Caps for the Positive and Ground Tabs … Read More

    • Hobbico HCAP0800 Field Equipment 7000mAh
      In Stock

      This sealed, Lead Acid battery delivers a full 7Ah of power. This battery has a 90 day warranty through Hobby Services. … Read More

    • Hobbico HCAP2503
      Out of Stock

      This is the Hobbico Twist-Lock Glow Plug Clip with Alligator Clips. Features Clip is made of Chrome Plated Steel Pre-installed … Read More

    • Hobbico HCAP2550
      Out of Stock

      This is a 4-Way Wrench with Plug Storage. It can be used to tighten and loosen Glow Plugs and prop nuts or any nut in the proper … Read More

    • Hobbico HCAP3200 Starter Motor
      Out of Stock

      This is a Hobbico TorqMaster 90 Deluxe 12V Starter. It is designed for starting Glow Engines up to .90 cubic inches in size. *** … Read More

    • Hobbico HCAP3335
      In Stock

      The Hobbico Safe Start "chicken stick" is a safe, easy way to Flip-Start Glow Powered Engines. This stick is held … Read More

    • O.S. Engines OSMG2691 Glow Plug
      Out of Stock

      The O.S. #8 glow plug is the most widely used O.S. glow plug. Recommended for most current O.S. (and other brands of) 2-stroke … Read More

    • Top Flite TOPQ5700 Hand Tools
      In Stock

      Greatly reduces prop vibration - protecting radio components, reducing engine wear, preventing structural damage and lowering … Read More

  • Manuals and Support

  • Test 2

Language Picker

  • English
  • Español


My Cart

No items in your cart