ElectriFly Slinger EP Flying Wing ARF Basic

  • ElectriFly Slinger EP Flying Wing ARF Basic

    This is the Radio Controlled, Electric Powered,
    Great Planes Slinger Almost Ready-to-Fly Expanded Foam Flying Wing Kit
    Park Pilot Program Legal Aircraft
    For Intermediate to Advanced Modeler/Fliers.


    Construction: Expanded foam, is resistant to rip, bend, and break
    Wings: One piece foam with ABS plastic winglets to add stability
    covered in heat shrink film
    Motor: Speed 400 size with prop
    Radio compartment: concealed underneath ABS center section
    Assembly Time: Approximately 30 minutes
    Warranty: Great Planes Model Manufacturing Company guarantees this
    kit to be free from defects in both materials and workmanship at
    date of purchase.


    Speed 400 motor with two props, two wing halves, center section,
    canopy, Velcro tape strip, pushrods with tubes, wing fins, decals,
    control horns, battery connector, photo-illustrated instructions,
    nylon tie strap, wing tape, and center section tape.


    Battery: 2S, 7.4V LiPo, such as the FlightPower FP25 series 2S
    7.4V 4000mAh, FPWP2402 recommended
    ESC: LiPo compatible, for Speed 400 motor, such as the Great Planes
    C-25, GPMM2025, (A Male Ultra Plug with Pigtail, WSDM2013 must be
    soldered to the ESC's motor leads to mate with the stock Slinger
    Charger: LiPo compatible
    Radio: 3 or 4 channel w/electronic mixing(or optional mixer GPMA2428)
    Servos: 2 mini (min. of 15 oz-in torque)
    Speed Control: 15A Electronic (GPMA2429)
    Glue: 6 minute epoxy (GPMR6042)
    Misc. Items: Building and Field Equipment


    Wingspan: 47.4" (1204mm)
    Wing Area: 462.8sq in (29.85sq dm)
    Weight: 27oz (765g)
    Wing Loading: 8.4 oz/sq ft (25.6 g/sq dm)
    Center of Gravity: 8" (203mm) Back from front tip of plane inverted

    Control Throws: Low Rate High Rate
    Elevator, up and down: 3/8" (9.5mm) ½" (12.7mm)
    Ailerons, up and down: ½" (12.7mm) ¾" (19mm)

    ***updated*** cmc 06/03/03
    ***updated*** NNA 08/27/03


    • Assembles in a half-hour - no building or painting required.
    • Rugged and resilient expanded foam parts offer outstanding resistance to rips, bends and breaks.
    • Easy to transport. Spans just under four feet and has no landing gear to bend or break.
    • Goes aloft with a hand launch and skids to a landing on its belly.
    • Included winglets attach with epoxy and stabilize flight throughout the entire performance envelope.
    • Precision-formed cockpit and simulated engine nacelles duplicate the looks of the mighty B2 bomber.
    • Center section offers ample room for all on-board gear - cockpit covers and protects gear, yet allows quick, easy access for pack changes or maintenance.
  • ElectriFly Slinger EP Flying Wing ARF Basic - Reviews

    Write a Review

    There are currently no reviews for ElectriFly Slinger EP Flying Wing ARF Basic, but you can be the first!

  • Great Planes ElectriFly Slinger EP Flying Wing ARF Basic Parts List (8 items)

  • Great Planes ElectriFly Slinger EP Flying Wing ARF Basic Hop-Ups & Optional Accessories (9 items)

  • Manuals and Support

  • Test 2

Language Picker

  • English
  • Español

Your Cart

My Cart

No items in your cart