This is the Flyzone Radio Controlled, Electric Powered, Receiver Ready (RxR) Extra 300SX 3D Airplane. This is the Rx-R (Receiver Ready) version that requires receiver, battery and charger. Includes motor, ESC and servos. For ages 14 and over.
Construction: AeroCell foam with large double beveled control surfaces Wing: One-piece Aileron Control: Dual servo Motor: 30-35-1000kV brushless outrunner Electronic Speed Control: 30A with star connector, 3A BEC Servos: Four micro Canopy: Molded clear plastic with magnetically attached AeroCell foam hatch, dashboard decal and pilot helmet Propeller: 10x4.5 black plastic Landing Gear: Prebent wire with 2" (51mm) foam main wheels and .75" (19mm) steerable tailwheel, magnetically attached landing gear covers and wheel pants that pop off during rough landings to avoid damage Spinner: 1.25" (44mm) diameter red plastic
Flyzone Rx-R Extra 300SX 3D Airplane with Motor, ESC, four Servos, Y-Harness, Landing Gear, Wheels, Covers and Wheel Pants, Spinner Decals and Instruction Manual
Radio: At least 4 channel transmitter and receiver LiPo Battery: 3S 11.1V 1800-2200mAh 30C LiPo charger and charging bag Maintenance and field equipment
Wingspan: 41.5" (1055mm) Wing Area: 297 sq in (19.2 sq dm) Weight: 28 - 31 oz (795 - 880 g) Wing Loading: 13.6-15.0 oz/sq ft (42-46 g/sq dm) Length: 34.5" (875mm) Center of Gravity (CG): 2-1/2" - 3-1/4" (64mm - 83mm) back from the leading edge of the wing at the fuselage side