0

Cart

Item(s)
Qty
Price

No items in your cart

80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2)

Click any image for gallery view.

80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2)

E-flite EFLA1080B Brushless Speed Control
In Stock
$99.99

Add to wishlist
  • 80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2)

    When performance matters in your high-current applications, look no further than the E-flite® 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a ‘pro series’ electronic speed control.

    This product is not intended for use by children under 14 years of age without direct adult supervision.

    Features

    • Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
    • 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
    • Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
    • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
    • Programmable motor braking
    • Safe power-arm mode prevents accidental starts
    • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
    • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
    • Programmable soft start-up rate - .25 second or 1 second
    • Auto motor shut down if signal is lost or there is interference
    • Programmable timing—5 user-selectable ranges–use with a large variety of brushless motors
    • Two operating modes–Airplane or Heli
    • Pre-wired connectors—E-flite EC5 on battery input and 4.0mm female gold bullets on motor output leads
    • NOTE: Not recommended to use with E-flite Power 60 Brushless Outrunner (EFLM4060B)

    Specifications

    Type: Speed Control
    Length 3.0 in (77mm)
    Width: 1.6 in (41mm)
    Wire Gauge: 10 awg input leads; 12 awg output leads
    Continuous Maximum Current: 80A
    Weight: 3.75 oz (106 g)
    Auto Cutoff: Yes
    BEC Voltage: 5.5 Volt switch-mode
    Brake: Yes
    Cells w/ BEC: 9- to 18-cell Ni-MH, 3–6S Li-Po
    Forward: Yes
    Height: 0.62 in (15.5mm)
    Input Connector Types: EC5, 10AWG
    Momentary Peak Current: 100A (15 seconds) Proper Cooling Required
    Output Connector Types: 4mm gold bullet, 12AWG
    Overload Protection: Yes
    Time Delay Brake: Yes
  • E-flite 80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2) Parts List (1 items)

  • E-flite 80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2) Hop-Ups & Optional Accessories (6 items)

  • Manuals and Support

Language Picker

  • English
  • EspaƱol
X

Cart

0
My Cart

No items in your cart