0

Cart

Item(s)
Qty
Price

No items in your cart

DLE-222cc 4-Cyl Gas Engine w/EI/Mufflers/Mount

Click any image for gallery view.

DLE-222cc 4-Cyl Gas Engine w/EI/Mufflers/Mount

DLE Engines DLEG0222 (DLE-222) Airplane Engine Gas
Out of Stock ETA: 08/31/2020
$1,649.99

Add to wishlist
  • DLE-222cc 4-Cyl Gas Engine w/EI/Mufflers/Mount

    This is the DLE 222cc Gasoline Powered Engine with Electronic Ignition.

    Features

    Dual carburetors for maximimum performance
    Double V-type reed valve bottom induction
    Six bolt prop hub
    Fully automatic electronic ignition
    Two year limited warranty through Hobby Services beginning at date
    of purchase

    Includes

    Engine, four spark plugs, standoffs, ignition, instruction manual
    two mufflers, prop hub and throttle arm extension

    Requires

    87 octane gasoline
    2-cycle oil, mix ratio for this engine is 30 parts gas to one part
    oil and must be followed exactly for warranty consideration
    and optimum performance
    Ignition Battery: Two 4.8 - 6V NiCd or NiMH batteries OR 7.4V LiPo
    Packs or 6.6V LiFe packs (LiPo & LiFe require voltage regulator)
    (separate receiver style pack can be used)
    Propeller: 32x10, 32x12, 34x10
    Field Equipment

    Specifications

    Engine;
    Output Power: 21.5 HP at 7,500 RPM
    RPM Range: 1,000 - 7,500
    Idle Speed: 1000 RPM
    Displacement: 13.6 cu in (222.5cc)
    Bore: 1.77" (45mm)
    Stroke: 1.38" (35mm)
    Compression Ratio: 7.6:1
    Engine Weight: 10.9lbs (174.6oz) (4950g)
    Total Width Including Both Cylinder Heads: 10.1" (258mm) not
    including spark plugs
    Distance between Horizontal Mounting Hole Centers: 3.2" (81mm)
    Distance between Vertical Mounting Hole Centers: 3.6" (91mm)
    Height of Entire Mounting Plate: 4.2" (107mm)
    Widtht of Entire Mounting Plate: 3.8" (96mm)
    Length from Mounting Plate to Front Bearing: 8.97" (228mm)
    Length from Mounting Plate to Prop Hub: 10.1" (258mm)
    Height from Crankcase to top of Carburetors: 6.2" (157mm)
    Distance between Muffler Mounting Hole Centers: 1.6" (40.5mm)
    Height from Crankcase to end of Muffler Pipe Outlet: 11.2" (286mm)
    Muffler Outlet Diameter: 1.2" (30mm)
    Cylinder Head Exhaust Outlet Height: 0.51" (13mm)
    Cylinder Head Exhaust Outlet Width: 1.1" (27mm)
    Muffler Can Length: 8.4" (214mm)
    Muffler Can Diameter: 2" (50mm)
    Exhaust Pipe Diameter: 1.2" (31mm)
    Exhaust Pipe Length: 6" (152mm)
    Gasoline/Oil Mixture: 30:1
    Gasoline Octane Rating: 87-93
    Recommended Propellers: 26x12, 28x10
    Spark Plugs: DLE 222-Q26 (DLEG2226) or equivalent
    Carburetor;
    Carburetor is preset from the factory but may require slight
    needle adjustment depending on altitude
    Low Speed Needle: 1.5 turns from closed
    High Speed Needle: 1.5 turns from closed

    Comments

    To avoid permanent damage to the electronic ignition system, NEVER
    turn your DLE engine over with the system switched on and the plug
    not installed.

  • DLE Engines DLE-222cc 4-Cyl Gas Engine w/EI/Mufflers/Mount Parts List (39 items)

  • DLE Engines DLE-222cc 4-Cyl Gas Engine w/EI/Mufflers/Mount Hop-Ups & Optional Accessories (0 items)

  • Manuals and Support

Language Picker

  • English
  • Español
X

Cart

0
My Cart

No items in your cart