0

Cart

Item(s)
Qty
Price

No items in your cart

DLE-40cc Twin Gas Engine w/EI

Click any image for gallery view.

DLE-40cc Twin Gas Engine w/EI

DLE Engines DLEG0040 Airplane
Out of Stock ETA: 06/15/2020
$469.99

Add to wishlist
  • DLE-40cc Twin Gas Engine w/EI

    This is the DLE-40cc Twin Cylinder Gasoline Engine
    with Electronic Ignition.

    Features

    Electronic ignition delvers smooth idle, easy starting and
    powerful throttle transition, spiral wire wrap eliminates
    interference
    Updated muffler design for increased noise reduction, excellent
    aeration and power
    Sealed crankshaft ball bearings
    Optimized pumper carburetor with phenolic insert to insulate
    carburetor from engine heat
    Lightweight pistons for fast acceleration, excellent compression and
    low vibration
    Composite backplate mount

    Includes

    DLE-40 Gasoline Engine with Electronic Ignition, NGK CM6 Spark Plugs,
    Electronic Ignition, Mufflers, four 0.98" (25mm) Standoffs
    and Instruction Manual

    Requires

    87 octane gasoline
    2-cycle oil, mix ratio for this engine is 30 parts gas to one part
    oil and must be followed exactly for warranty consideration
    and optimum performance
    4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition
    (separate receiver style pack can be used) (LiPo & LiFe requires
    voltage regulator)
    Propeller: 19x8, 19x10, 20x8, 20x10
    Field Equipment

    Specifications

    Displacement: 2.45 cu in (40.0 cc)
    Bore (x2): 1.26" (32mm)
    Stroke (x2): 0.98" (25mm)
    RPM Range: 1,500-8,500
    Performance: 4.8 HP @ 8,500RPM
    Idle Speed: 1500RPM
    Compression Ratio: 10.5:1
    Overall Weight: 3.3lbs (1.5kg)
    Engine Weight: 2.58lbs (1170g)
    Muffler Weight (x2): 3.6oz (102g)
    Ignition Module Weight: 5.3oz (149g)
    Engine Mount Standoff Weight: 0.7oz (19g)
    Miscellaneous Item Weight: 2oz (56g)
    Width between Cylinder Heads: 7.1" (180mm)
    Total Width Including Spark Plugs: 9.05" (230mm)
    Distance between Mounting Hole Centers/Narrow Side: 2.1" (54mm)
    Distance between Mounting Hole Centers/Wide Side: 2.7" (70mm)
    Length/Backplate to Outer Edge of Prop Drive Hub: 6.3" (161mm)
    Distance from Crankshaft Center/Outer edge of Carb: 3.5" (90mm)
    Standoff Length: 0.98" (25mm)
    Spark Plug Gap: 0.018 - 0.020" (0.45mm - 0.51mm)

    Carburetor Settings; (carb is preset at factory and should require
    only small adjustments)
    Idle Adjustment Screw: Turn clockwise to increase idle speed,
    conterclockwise to decrease idle speed
    Low Speed Needle: Turn needle to fully closed position, then open
    1.25 turns
    High Speed Needle: Turn needle to fully closed position, then open
    1.5 turns-tachometer is recommended when setting high speed
    needle to obtain maximum speed

  • DLE Engines DLE-40cc Twin Gas Engine w/EI Parts List (30 items)

  • DLE Engines DLE-40cc Twin Gas Engine w/EI Hop-Ups & Optional Accessories (3 items)

    • DLE Engines DLEG5525 (55-25)
      Ships in 2-3 days
      (Ships within three business days after order placed)
      $19.99

      This is the Onboard Digital Tachometer for use with the DLE 55-25 Engines. Features Mini tachometer indicates up to 30,000RPM … Read More

      This product may take one additional day to ship (and may delay rest of order).
    • DLE Engines DLEG9205 Hardware
      Ships in 2-3 days
      (Ships within three business days after order placed)
      $19.99

      This is DLE V2.0 Gasoline Engine Kill Switch. Features Allows pilot to shut off their electronic ignition equipped gasoline … Read More

      This product may take one additional day to ship (and may delay rest of order).
    • DLE Engines DLEQ0301 Hand Tools
      Out of Stock ETA: 06/09/2020
      $19.99

      This is the Propeller Drill Guide for the DLE 30, 35RA and 40CC Gasoline Aircraft Engines. **Additional Technical Info Will … Read More

Language Picker

  • English
  • Español
X

Cart

0
My Cart

No items in your cart