Albatros D.Va 25e ARF

Albatros D.Va 25e ARF

E-flite EFL4605 Airplane (Discontinued)
Out of Stock

This item is discontinued but parts are still available in the Parts List below.

Albatros D.Va 25e ARF

The E-flite® Albatros D.Va 25e is an accurate, electric-powered reproduction of the famed German fighter used during WWI with the Jasta 18 squadron. Constructed of laser-cut balsa, this red-nosed hunter includes the finer-point detail only available as a Platinum Series model and is sure to stand the test of time, just like its full-scale cousin. Even the most discerning modeler will appreciate the exceptional level of included detail. From the Lozenge camouflage covering on the bottom of the wings to the exposed cylinders of the Mercedes engine and the vented barrels of its Spandau machine gun, this battle-bird has an authentic look from any angle.


  • Fully-functional, shock-absorbing landing gear with scale wheels
  • Top and bottom plug-in wings with carbon fiber wing tube
  • Molded motor and machine gun detail
  • Authentic wire rigging and optional pull-pull controls included
  • Unique painted aluminum spinner included
  • Realistic varnished wood tail skid included
  • Optional cockpit kit available (EFL460515)

You Will Need

- 4+ channel transmitter and receiver radio system
- Brushless outrunner motor
- Brushless ESC
- Propeller
- Two (2) mini servos and two (2) micro servos
- Flight battery
- Charger for flight battery


Wingspan: 53.0 in (1350mm)
Overall Length: 44.0 in (1120mm)
Flying Weight: 5.20–5.55 lb (2.40–2.50 kg) without battery; 6.00–6.40 lb (2.70–2.90 kg) with battery
Motor Size: Power 25–32
Radio: 4+ channel radio required
Servos: (2) mini servos, (2) micro servos required
Prop Size: 13 x 4E (Power 25); 14 x 7E (Power 32)
Scale: 18%
Wing Area: Top wing: 437 sq in (28.2 sq dm); Bottom wing: 318 sq in (20.5 sq dm); Total: 755 sq in (48.7 sq dm)
Wing Loading: 18.3–19.5 oz/sq ft
Recommended Environment: Outdoor
Speed Control: 60-amp brushless
Assembly Time: 7-9 Hours
Recommended Battery: 4S 3200mAh Li-Po
Experience Level: Intermediate
Is Assembly Required: Yes
Minimum Age Recommendation: 14 years
Spinner Size: 93mm
Trim Scheme Colors: UltraCote® True Red (HANU866), White (HANU870), Black (HANU874), Lozenge (EFL460517)
Approximate Flying Duration: 10 minutes
CG (center of gravity): 1-9/16 to 2-3/8 in (40 to 60mm) back from leading edge of top wing
Control Throw (Ailerons): Low: 9/16 in (14mm) up, 3/16in (4mm) down, 15% expo; High: 3/4 in (19mm) up, 1/4 in (6mm) down, 25% expo
Control Throw (Elevator): Low: 1-3/16 in (30mm) up/down, 20% expo; High: 1-3/4 in (45mm) up/down, 30% expo
Control Throw (Rudder): Low: 1-3/16 in (30mm) left/right, 20% expo; High: 1-3/4 in (45mm) left/right, 30% expo

Parts List (6 items)

Hop-Ups & Optional Accessories (7 items)

Manuals and Support