No items in your cart

Extra 260 3D 480 ARF

Extra 260 3D 480 ARF

E-flite EFL2475 Airplane (Discontinued) Electric ARF

This item is discontinued but parts are still available in the Parts List below.
  • Extra 260 3D 480 ARF

    The Extra 260 3D 480 ARF is one of the first E-flite® planes to use a new construction technique that eliminates unnecessary weight without sacrificing any strength. This super-lightweight construction, combined with its generous wing area, results in exceptionally light wing loading. Plus, its firewall is designed to accept E-flite’s powerful Park 480 Brushless Outrunner Motor, without modification. It all comes together to give you a fantastic flying 3D airplane without limits and with nothing but possibilities.


    • Generous wing area for lighter wing loading
    • Large control surfaces for precise control in high-alpha flight
    • Exceptionally lightweight balsa and plywood construction
    • Designed for use with E-flite’s Park 480 brushless outrunner motor
    • Factory-painted fiberglass cowl and wheel pants
    • Aluminum landing gear and steerable tail wheel
    • Plug-in wings for easy transport
    • Assembles in just a few evenings
    • Covered in genuine UltraCote® and UltraCote Lite

    You Will Need

    6-channel transmitter (for proper mixing and dual rate capabilities)
    Micro receiver
    4 sub-micro servos
    Park 480 BL Outrunner Motor
    40A Brushless ESC
    12x6 Electric
    Battery & Charger


    Type: Airplanes
    Wingspan: 43 in (1090mm)
    Overall Length: 40 in (1015mm)
    Flying Weight: 26–29 oz (740–820 g)
    Motor Size: Park 480 BL Outrunner
    Radio: 6 channels or more for proper mixing
    Servos: Sub-micro (4)
    Prop Size: 12x6 Electric
    Wing Area: 375 sq in (24.2 sq dm)
    Speed Control: 35A-40A Brushless
    Approximate Assembly Time: 4-6 hours
    Recommended Battery: 1320-2100mAh 11.1V 3-cell Li-Po
    Hardware Included: Yes
    Spinner Size: 1 3/4 in
    Trim Scheme Colors: Pearl Purple (HANU847), Bright Yellow (HANU872), Silver (HANU881), Lite Transparent Clear (HANU964), Lite White (HANU973)
    CG (center of gravity): 3 inches (75mm) to 3 1/8 inches (79mm)
    Control Throw (Ailerons): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm)
    Control Throw (Elevator): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm)
    Control Throw (Rudder): Low 1-1/2-inch (38mm) or High 2-1/2-inch (64mm)
  • E-flite Extra 260 3D 480 ARF Parts List (17 items)

  • E-flite Extra 260 3D 480 ARF Hop-Ups & Optional Accessories (3 items)

  • Extra 260 3D 480 ARF - Reviews

    Write a Review

    There are currently no reviews for Extra 260 3D 480 ARF, but you can be the first!

  • Test 1

Language Picker

  • English
  • Español


My Cart

No items in your cart