Features

High-quality construction with ball bearings and hardened steel shaft
External rotor design—5mm shaft can easily be reversed for alternative motor installations
Quiet, lightweight operation
Equivalent to a 10-size glow engine for 32–48 ounce (910–1360 g) airplanes
Ideal for 3D airplanes weighing 28–36 ounces (790–1020 g)
Slotted 14-pole outrunner design
Includes mount, prop adapters and mounting hardware
High-torque, direct-drive alternative to inrunner brushless motors
Ideal for models requiring up to 450 watts of power

Overview

Key Features

Equivalent to a 10-size glow engine for 32–48 ounce (910–1360 g) airplanes
Ideal for 3D airplanes weighing 28–36 ounces (790–1020 g)
Ideal for models requiring up to 450 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design—5mm shaft can easily be reversed for alternative motor installations
Slotted 14-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation

Needed To Complete

40A ESC
6- to 10-cell Ni-MH/Ni-Cd or 2–3S Li-Po
10x5 to 12x6 electric props

Overview

The Power 10 is designed to deliver clean and quiet power for 10-size sport and scale airplanes weighing 32 to 48 ounces (910 to 1360 grams), 3D airplanes weighing 28 to 36 ounces (790 to 1020 grams), or models requiring up to 450 watts of power. It’s an especially good match for the E-flite Brio 10 for high speed F3A precision or artistic aerobatics.

Specifications

Adjustable Timing: No
Bushing Or Bearing: Bearing
Connector Type: 3.5mm Bullet
Idle Current (Io): 2.10A @10V
Motor Design: Outrunner
Motor Type: Brushless
Recommended Prop Range: 10x5 - 12x6
Resistance: .043 ohms
RPM/Volt (Kv): 1100
Shaft Diameter: 0.2" (5 mm)
Voltage: 2S - 3S LiPo
Wire Gauge: 16 AWG

Power 10 Brushless Outrunner Motor, 1100Kv

Power 10 Brushless Outrunner Motor, 1100Kv