Features

Ideal for indoor and outdoor small aerobatic park flyers
High-quality construction with ball bearings and hardened steel shaft
Up to 30 watts
Designed for firewall mount or carbon tube mount
Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
Upgraded performance for indoor motors
Includes prop adapter
4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
Includes mount, mounting hardware and 2mm gold BL connectors
Extremely quiet and lightweight—just .3 oz (8.5 g)
High-torque, direct-drive alternative to inrunner brushless motors

Overview

Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
Ideal for indoor and outdoor small aerobatic park flyers
Extremely quiet and lightweight—just .3 oz (8.5 g)
High-torque, direct-drive alternative to inrunner brushless motors
Designed for firewall mount or carbon tube mount
4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
Up to 30 watts
Includes prop adapter
Includes mount, mounting hardware and 2mm gold BL connectors
Upgraded performance for indoor motors
High-quality construction with ball bearings and hardened steel shaft

4-6A Brushless ESC

2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH

3x3 Direct Drive Prop

Ideal for 3D models 2–3 oz (55–85 g) and sport and scale models 3–6 oz (85–170 g) or models requiring up to 30 watts of power.

Adjustable Timing: No
Bushing Or Bearing: Bearing
Connector Type: 2mm Bullet
Idle Current (Io): .30A @ 8V
Motor Design: Outrunner
Motor Type: Brushless
Outer Diameter: 0.63 in (16mm)
Recommended Prop Range: 3x3 to 6x3 ‘Direct Drive’ for 2S or 4x4 or 4.5x3 for 3S
Resistance: .91 ohms
RPM/Volt (Kv): 2200
Shaft Diameter: 1.5mm
Voltage: 4.8–11.4V