SCHLIESSEN

Warenkorb
Arrows F8F Bearcat 1100mm PNP-HOBBY ZONE
Arrows F8F Bearcat 1100mm PNP-HOBBY ZONE
Arrows F8F Bearcat 1100mm PNP-HOBBY ZONE
Arrows F8F Bearcat 1100mm PNP-HOBBY ZONE
Arrows F8F Bearcat 1100mm PNP-HOBBY ZONE
Arrows F8F Bearcat 1100mm PNP-HOBBY ZONE

Arrows F8F Bearcat 1100mm PNP

Arrows F8F Bearcat 1100mm PNP

This item is discontinued.
AH005P
$229.99 USD
$0.00 USD
Menge
0 verbleibend im Bestand
Staffelpreise
Menge
Preis
1+
$229.99 USDStück
Shipping Policy
Return Policy
90-Day Warranty Policy

Arrows F8F Bearcat 1100mm PNP

Shortly after the Battle of Midway, Jamie Thach (inventor of the Thach Weave combat tactic) and other pilots who had participated, met with Grumman personnel at Pearl Harbor to give input into a new carrier fighter design, specifically with maximum climb rate for interception. The resultant plane, the Bearcat, had the same engine as the F6F Hellcat, but was about 5 feet shorter. This, combined with a lighter airframe and a thinner wing, allowed the Bearcat a 50mph advantage over the Hellcat and a record setting climb rate. There is speculation that the testing of a captured German FW190 interceptor may have influenced the design. While arriving operationally in the summer of 1945 to the Pacific, the Bearcat was immediately busy being a Kamikaze Killer of the top rank.

After the war the Bearcat filled out 24 squadrons and outperformed the early jet fighters, until being replaced by the F9F Panther and F2H Banshee during the Korean War. Subsequently the Bearcats went on to serve with the French in Vietnam as well as Thailand.

In civilian use, surplus Bearcats dominated the Reno Air Races for decades. A highly modified F8F named Rare Bear set the world speed record for propeller driven aircraft at 528mph in 1989.

Arrows faithfully recreates the F8F in exceptional realism. Despite its compact size, the realistic landing gear, retracts, panel lines, functional flaps, pilot and auxiliary fuel tank were all replicated realistically. The preinstalled 40A ESC and 3536 850kV power system is adapted for scale and sport flight maneuvers. For scale lovers, the Bearcat awaits!


Features:
  • High power-to-weight ratio
  • Realistic scale details
  • Simple yet robust airframe
  • Easy assembly
  • No glue required
  • Environmentally friendly water-based paint
Includes:
  • F8F
  • 3536 850kV outrunner brushless motor (installed)
  • 40A ESC installed
  • Electronic retractable landing gear (installed)
  • Servos (installed)
Requires:
  • 6-Channel radio transmitter
  • 6-Channel receiver
  • 3-Cell 11.1V 2200mAh LiPo battery
  • 3-Cell compatible battery charger


Needed to Complete

This is a PNP rc plane and requires a radio system, battery, and charger to be complete.

 

Specifications

Wingspan: 1100mm (43.3in)
Length: 882mm (34.7in)
CG (Center of Gravity): 90-95mm from leading edge
Power System: 3638-850kV Brushless Outrunner Motor
Electronic Speed Control: 40A
Propeller / EDF: 11 x 7.5 x 4
Servos: 9 gram servo x 6
Landing Gear: Electronic retractable main gear
Required Battery: 3S 3200mAh LiPo required
Required Radio: 6 Channel transmitter and receiver required
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Lights: No
Hinge Type: Foam
Material: EPO Foam
Skill Level: Intermediate
Build Time: 1-2 Hours
Recommended Environment: Outdoor, 100 foot paved runway or short manicured grass

 

Manuals and Support

 

Videos on YouTube