Features

Programmable throttle input range (1.1ms–1.9ms or Auto Select)
Soft start
Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
Programmable motor braking
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
Up to 10-amp continuous current with proper air flow
Auto motor shutdown if signal is lost or there is interference
Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
Safe power-arm mode prevents accidental starts

Overview

Key Features

Up to 10-amp continuous current with proper air flow
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
Programmable throttle input range (1.1ms–1.9ms or Auto Select)
Auto motor shutdown if signal is lost or there is interference
Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
Soft start

Overview

This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2–3 cell Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power-arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.

Specifications

Amperage: 20 & Under
Brakes: Yes - Programmable
Connector Type: JST
Maximum Burst Current: 12A (15 sec)
Output Connector: 2mm Bullet
Part Type: Electronics
Programmable: Yes

Manuals

10-Amp Pro Brushless ESC Manual

10-Amp Pro Brushless ESC

10-Amp Pro Brushless ESC