No items in your cart

MonoKote Flat Black 6'

Click any image for gallery view.

MonoKote Flat Black 6'

Top Flite TOPQ0508 Covering
In Stock

Add to wishlist
  • MonoKote Flat Black 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive,
    Easy, Clean, and When Compared to "old fashioned" Coverings, Quick To Use.

    For great covering ideas and to insure a professional finish, order
    the MonoKote Covering Instructional DVD, TOPZ0105.


    Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
    Lightweight at Only 0.2 oz/sq ft
    Dry Adhesive Activates When Heat is Applied
    Shrinks to a Drum-Tight Finish As It Cools
    Fuelproof and Waterproof
    Stronger and Lighter Than Traditional Silk and Dope Coverings
    May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish


    One (6' x 26") Roll of Flat Black Covering w/Instruction Sheet


    Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)


    Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
    Vary Slightly In Color Between Production Runs of These Products.
    LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its
    True Color.
    MonoKote Trim Sheet (Gloss): TOPQ4109
    MonoKote (Gloss): TOPQ0208
    MonoKote is a High Temperature Covering, NOT For Use Directly On Foam
    EconoKote IS For Use Directly On Foam, Use the Following:
    EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote may be used on top of, but not under MonoKote.)
    **Temperature Ranges: Flat MonoKote Uses a Higher Temperature to Apply.
    Attaching to Wood: 240 - 275°F (activating the glue)
    Partial Shrinkage: 230 - 270°F
    Maximum Shrinkage: 270 - 350°F
    TECH NOTE: The characteristics of the flat MonoKote differ slightly from
    standard MonoKote covering:
    Flat MonoKote requires higher temperatures to apply than standard
    MonoKote because of the flat finish. In addition to the higher temp
    settings, this covering may require the iron to be in contact with
    the covering and wood slightly longer than the standard finish.
    If this covering is applied too loosely, it may be difficult to get
    a tight shrink with this product. Also, when applied loosely, it
    could become impossible to remove any wrinkles that may appear.

Language Picker

  • English
  • Español


My Cart

No items in your cart