E-flite Mini Ultra Stick ARF

EFL2250 Price:

Features

• Perfect transitional airplane for beginners who want to learn aerobatics and for sport flyers who want easy comfortable flyer
• Design based on Hangar 9’s popular line of Ultra Sticks
• Lightweight balsa and ply construction
• Covered in genuine Hangar 9 UltraCote
• Two firewall options let you use a wide variety of motor sizes, types and brands
• Includes molded firewall stick mount
• Optional quad-flap configuration
• Tough, lightweight aluminum landing gear that’s pre-assembled and tall enough to accommodate larger prop sizes
• 95% pre-built—get flying in 2 hours or less
• Control surfaces have pre-installed hinges and control horns
• Bolt-on tail requires no gluing and secures with two lock nuts
• Great match for E-flite Park 450 Outrunner Brushless Motor
• Easy access battery hatch

Overview

Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.

• Preinstalled control surfaces and hinges
• Preinstalled control horns
• Preinstalled pushrods
• Bolt-on horizontal and vertical stabilizers
• Preassembled landing gear with wheels attached

Tech Notes

You will need...
Brushless Motor
Brushless ESC
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
6-Ch Receiver
Li-Po Battery
Li-Po Charger
CA

Specifications

• Wing Span: 38.75 in (985mm)
• Overall Length: 34 in (865mm)
• Wing Area: 325 sq in (21 sq dm)
• Flying Weight: 22 - 25 oz (625 - 710g)
• Motor Size: Park 400 Inrunner or Park 450 Outrunner
• Radio: 4-channel or greater (7-channel for quad flaps)
• Servos: 4 sub-micros (6 sub-micros for quad flaps)
• Trim Scheme Colors: UltraCote Fluourescent Blue, Flame Red, Transparent Red & White
• CG (center of gravity): 2.25 in (57mm) behind the leading edge
• Prop Size: 10x7 - 11x7
• Hardware Included: Yes
• Speed Control: 20A Brushless
• Recommended Battery: 2100 mAh 3-Cell 11.1V Li-Po
• Flaps: Yes (optional)
• Control Throw (Ailerons): 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate
• Control Throw (Elevator): 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate
• Control Throw (Rudder): 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate
• Approx. Flying Duration: 10-20 minutes
• Scale: Park Flyer
• Approx. Assembly Time: 1-2 hours
• Gear Ratio: 6.5:1 when using Park 400 Brushless Inrunner