- Parts Listing
- Completion Parts, Tools & Accessories
- Needed to Complete
- •6-channel transmitter
(for proper mixing and dual rate capabilities)
•Micro receiver
•4 sub-micro servos
•Motor
•20A Brushless ESC
•Propeller
•Battery & Charger - Manual
E-flite Edge 540 BP 3D ARF
EFL2600 Price:
New!
Features
- Light wing loading for excellent 3D performance
- Open structure airframe keeps weight to a minimum
- Tapered-thickness airfoil for improved handling
- 90% factory built and covered in UltraCote® and UltraCote Lite
- Factory-drilled control horn mounting holes
- Factory-finished wheel pants
- Includes outrunner stick mount for use with Park 400 and Park 450 outrunner motors
- Includes all hardware
- Generously proportioned control surfaces
Overview
The Edge 540 BP 3D combines the sturdy construction of a balsa/lightweight plywood airframe with the uninhibited 3D capability of a lightweight profile park flyer. It’s all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wooden airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote, so you can be up and flying in no time.Specifications
- Wing Span: 35.5in (900mm)
- Overall Length: 36.5 in (930mm)
- Wing Area: 410 sq in (26.5 sq dm)
- Flying Weight: 15-16 oz (425-455g)
- Motor Size: Park 400 or Park 450
- Radio: 6 channels (for proper mixing)
- Servos: 4 sub-micro
- Trim Scheme Colors: Ultracote Lite Transparent Clear (HANU964), Ultracote Lite Transparent Yellow (HANU967),Ultracote White (HANU870),Ultracote True Red (HANU866)
- CG (center of gravity): 4 1/2-inch (114mm)
- Prop Size: 11x3.8 slowflyer (park 400) or 12x6 E (Park 450)
- Hardware Included: Yes
- Speed Control: 20A Brushless
- Recommended Battery: 11.1V 3-cell 910-1320mAh Li-Po
- Control Throw (Ailerons): 1" (25mm) with 20% Expo on Low or 2" (50mm) with 40% Expo on High
- Control Throw (Elevator): 2" (50mm) with 20% Expo on Low or 2-3/4" (70mm) with 45% Expo on High
- Control Throw (Rudder): 3-1/2" (89mm) Left and Right
- Scale: Park Flyer
- Approx. Assembly Time: 3-4 Hours