Videos ofE-flite Blade CP Pro RTF Electric Micro Helicopter
EFLH1300
Features
- No assembly required
- CCPM and Bell-Hiller mixing for lightning fast cyclic response
- Symmetrical main rotor blades for aerobatics and inverted flight
- Main and tail motor heat sinks to help maintain maximum performance and prolong motor life
- 3-cell 800mAh Li-Po battery pack with Charge Protection Circuitry and a DC Li-Po balancing charger
- 6-channel FM radio system with CCPM, Idle Up flight mode switch and adjustment knob, and optional-use proportional fifth channel
- Unique 6-channel FM receiver, plus advanced 3-in-1 control unit with main motor and tail motor ESCs, mixer and gyro
- Plug and play compatibility with brushless power systems and heading lock gyros
Overview
Based on the tried and true Blade CP platform, the Blade CP Pro adds the lightweight power of a 3-cell 800mAh Li-Po battery pack, the lightning quick cyclic response of Bell-Hiller mixing, and the upright or inverted agility of symmetrical main rotor blades. Plus, it can easily be outfitted with brushless power and a heading lock gyro, without the need for a new radio system or difficult modifications. For red-hot micro heli aerobatics in about the time it takes for you to charge a battery pack, nothing can touch the cutting-edge Blade CP Pro.
E-flite uses top-quality engineering and materials in everything that's produced, providing you with the maximum level of value and fun. E-flite backs all of its products with the best customer service and support in the hobby, so your electric flight experience is always a positive one.
Tech Notes
You will need...You won't need a thing to fly your Blade CP Pro. Everything that's needed for flight is included with your purchase. Check out the Optional Parts section for parts you can buy to make your Blade CP Pro perform at its peak!
Specifications
- Type: RTF Electric Micro Heli
- Main Rotor Diameter: 20.3 in (515mm)
- Tail Rotor Diameter: 5.8 in (148mm)
- Gross Weight: RTF with Li-Po battery, 10.5 oz (298 g)
- Length: 20.7 in (526mm)
- Motor Size: 370 main motor, N30 tail motor
- Kit/ARF/RTF: RTF
- Control System: CCPM