E-flite Eratix 3D 25e ARF
EFL4075
Order an Eratix 3D 25e and receive a free set of
Pro-Lite wheels (HAN305)
Features
- Capable of sport-to-extreme 3D aerobatics
- Generous wing area & light wing load for superb slow flight response
- Specially-designed, machined, aluminum, 3D control horns
- Lightweight, open-structure airframe design
- Top quality, laser-cut balsa and lightweight plywood materials
- Firewall accepts E-flite Power 25 or Power 32 brushless motors without modification
- Tough, lightweight aluminum landing gear with factory-painted fiberglass wheel pants
- Factory-painted fiberglass cowl
- Easy-access magnetic battery hatch
- Ground clearance optimized for a wide range of prop sizes
- Steerable tail wheel
Overview
The E-flite Eratix 3D 25e ARF is a 3D-capable sport plane designed to make the transition from sport models to more challenging 3D aircraft a lot less demanding. Its large wing area and light wing loading offer very forgiving flight characteristics, especially in slow flight. It’s also compatible with a range of motor and propeller sizes so you can fine tune the power and performance to your skill level. Both the E-flite Power 25 and Power 32 brushless outrunner motors bolt to the firewall without any modifications. Experienced 3D pilots will appreciate the uniquely designed, machined aluminum 3D control arms that can handle the rigors of high-torque mini servos and large control throws. Sport aerobatics or stick-bending 3D, the Eratix 3D 25e is up for whatever you are.
Specifications
- Wing Span: 54 in (1370mm)
- Overall Length: 53 in (1350mm)
- Wing Area: 696 sq in (44.9 sq dm)
- Flying Weight: 3-3.25 lb (1.4-1.5 kg)
- Motor Size: Power 25 or 32 required
- Radio: 6+ channels
- Servos: 4 mini
- Trim Scheme Colors: UltraCote Lite White (HANU973), Fluorescent Orange (HANU895), Fluorescent Blue (HANU896), and Clear (HANU964)
- CG (center of gravity): 3.75-4 in (80-100mm) from leading edge
- Prop Size: 13 x 6.5E, 14 x 7E, or 15 x 8E depending upon which recommended setup you choose
- Speed Control: 60A ESC (EFLA1060)
- Recommended Battery: 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po (THP42003S2PPL or THP38504SX)
- Control Throw (Ailerons): High Rate: 3 in (75mm) up and down; Low Rate: 1 in (25mm) up and down
- Control Throw (Elevator): High Rate: 3.5 in (90mm) up and down; Low Rate: 1 in (25mm) up and down
- Control Throw (Rudder): High Rate: 4.5 in (115mm) left and right; Low Rate: 2 in (50mm) left and right
Needed to Complete
- Radio System: 6+ channels
- Servo: 4 mini servos
- Motor: Power 25 or Power 32 motor
- Speed Control: 60-Amp ESC
- Prop: 13 x 6.5E, 14 x 7E or 15 x 8E, depending upon the motor selected
- Battery: 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po